Archive for the ‘All Repeaters’ Category

ABS-27-1W 3G signal Repeater/Amplifier/Booster

Tuesday, July 31st, 2012

Product Description

The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

Features

l  High gain, easy installation and operation.

l  Full-duplex, single-port design, build-in power supply.

l  Use ALC technology, adjust extent automatically

l  LED Light Working & Signal Condition Indicators

l  Big linear power, control intermodulation & saturation stably

l  Dependability stand by GB6993-86 standard

l  Compatibility of electromagnetism according with ETS300 609-4

l  CE and RoHs Approved

Technique

 

Frequency range
3G,WCDMA (
2110-2170)

1920-1980MHz,
2110-2170MHz  

Gain ( dB)

Uplink Gp≥55 Downlink Gp≥60

Export power (Po)

≥27dBm

Pass band ripple

≤3dB

I/O impedance

50Ω/N connector

Noise figure

≤4dB

Transmission Delay

≤0.5μs

Ambient temperature

-1060

Power supply

AC110240V 4555Hz

Size

204×120×37mm

Reliability

To the GB6993-86 standard

Electromagnetic compatibility

To the ETS300 694-4 standard

Function

a) Power supply LED denote
b) Export power LED denote

coverage area

2000 m2

Installation Approaches

  1. Fix up outdoor antenna reception on housetop and point to signal tower.
  2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
  3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
  4. Plug power adaptor into AC power socket and finish installation.

Technique Supporting

  1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
  2. If cannot call out, please adjust the direction of outdoor antenna.
  3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

Accessories
Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

Packing list
Main unit 1pc
Power supply 1pc
User manual 1pc

ABS-33-1W 3G signal Repeater/Amplifier/Booster

Tuesday, July 31st, 2012

Product Description

The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

Features

l  High gain, easy installation and operation.

l  Full-duplex, single-port design, build-in power supply.

l  Use ALC technology, adjust extent automatically

l  LED Light Working & Signal Condition Indicators

l  Big linear power, control intermodulation & saturation stably

l  Dependability stand by GB6993-86 standard

l  Compatibility of electromagnetism according with ETS300 609-4

l  CE and RoHs Approved

Technique

 

Frequency range
3G,WCDMA (
2110-2170)

1920-1980MHz,
2110-2170MHz  

Gain ( dB)

Uplink Gp≥55 Downlink Gp≥60

Export power (Po)

≥33dBm

Pass band ripple

≤3dB

I/O impedance

50Ω/N connector

Noise figure

≤4dB

Transmission Delay

≤0.5μs

Ambient temperature

-1060

Power supply

AC110240V 4555Hz

Size

204×120×37mm

Reliability

To the GB6993-86 standard

Electromagnetic compatibility

To the ETS300 694-4 standard

Function

a) Power supply LED denote
b) Export power LED denote

coverage area

3000 m2

Installation Approaches

  1. Fix up outdoor antenna reception on housetop and point to signal tower.
  2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
  3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
  4. Plug power adaptor into AC power socket and finish installation.

Technique Supporting

  1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
  2. If cannot call out, please adjust the direction of outdoor antenna.
  3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

Accessories
Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

Packing list
Main unit 1pc
Power supply 1pc
User manual 1pc

ABS-33-1D DCS signal Repeater/Amplifier/Booster

Tuesday, July 31st, 2012

Product Description

The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

Features

l  High gain, easy installation and operation.

l  Full-duplex, single-port design, build-in power supply.

l  Use ALC technology, adjust extent automatically

l  LED Light Working & Signal Condition Indicators

l  Big linear power, control intermodulation & saturation stably

l  Dependability stand by GB6993-86 standard

l  Compatibility of electromagnetism according with ETS300 609-4

l  CE and RoHs Approved

Technique

 

Frequency range DCS1800

1710—1785MHz
1805—1880MHz  

Gain ( dB)

Uplink Gp≥55 Downlink Gp≥60

Export power (Po)

≥33dBm

Pass band ripple

≤3dB

I/O impedance

50Ω/N connector

Noise figure

≤4dB

Transmission Delay

≤0.5μs

Ambient temperature

-1060

Power supply

AC110240V 4555Hz

Size

204×120×37mm

Reliability

To the GB6993-86 standard

Electromagnetic compatibility

To the ETS300 694-4 standard

Function

a) Power supply LED denote
b) Export power LED denote

coverage area

3000 m2

Installation Approaches

  1. Fix up outdoor antenna reception on housetop and point to signal tower.
  2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
  3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
  4. Plug power adaptor into AC power socket and finish installation.

Technique Supporting

  1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
  2. If cannot call out, please adjust the direction of outdoor antenna.
  3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

Accessories
Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

Packing list
Main unit 1pc
Power supply 1pc
User manual 1pc

ABS-15-1G1W GSM/3G dual signal Repeater/Amplifier/Booster

Tuesday, July 31st, 2012

Product Description

The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

Features

l  High gain, easy installation and operation.

l  Full-duplex, single-port design, build-in power supply.

l  Use ALC technology, adjust extent automatically

l  LED Light Working & Signal Condition Indicators

l  Big linear power, control intermodulation & saturation stably

l  Dependability stand by GB6993-86 standard

l  Compatibility of electromagnetism according with ETS300 609-4

l  CE and RoHs Approved

Technique

 

Frequency range

890-915/1920-1980
935-960/2110-2170

Gain ( dB)

Uplink Gp≥55 Downlink Gp≥60

Export power (Po)

≥15dBm

Pass band ripple

≤3dB

I/O impedance

50Ω/N connector

Noise figure

≤4dB

Transmission Delay

≤0.5μs

Ambient temperature

-1060

Power supply

AC110240V 4555Hz

Size

204×120×37mm

Reliability

To the GB6993-86 standard

Electromagnetic compatibility

To the ETS300 694-4 standard

Function

a) Power supply LED denote
b) Export power LED denote

coverage area

800 m2

Installation Approaches

  1. Fix up outdoor antenna reception on housetop and point to signal tower.
  2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
  3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
  4. Plug power adaptor into AC power socket and finish installation.

Technique Supporting

  1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
  2. If cannot call out, please adjust the direction of outdoor antenna.
  3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

Accessories
Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

Packing list
Main unit 1pc
Power supply 1pc
User manual 1pc

ABS-15-1G1D GSM/DCS dual signal Repeater/Amplifier/Booster

Tuesday, July 31st, 2012

Product Description

The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

Features

l  High gain, easy installation and operation.

l  Full-duplex, single-port design, build-in power supply.

l  Use ALC technology, adjust extent automatically

l  LED Light Working & Signal Condition Indicators

l  Big linear power, control intermodulation & saturation stably

l  Dependability stand by GB6993-86 standard

l  Compatibility of electromagnetism according with ETS300 609-4

l  CE and RoHs Approved

Technique

 

Frequency range

890-915/1710-785
935-960/1805-880

Gain ( dB)

Uplink Gp≥55 Downlink Gp≥60

Export power (Po)

≥15dBm

Pass band ripple

≤3dB

I/O impedance

50Ω/N connector

Noise figure

≤4dB

Transmission Delay

≤0.5μs

Ambient temperature

-1060

Power supply

AC110240V 4555Hz

Size

204×120×37mm

Reliability

To the GB6993-86 standard

Electromagnetic compatibility

To the ETS300 694-4 standard

Function

a) Power supply LED denote
b) Export power LED denote

coverage area

800 m2

Installation Approaches

  1. Fix up outdoor antenna reception on housetop and point to signal tower.
  2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
  3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
  4. Plug power adaptor into AC power socket and finish installation.

Technique Supporting

  1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
  2. If cannot call out, please adjust the direction of outdoor antenna.
  3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

Accessories
Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

Packing list
Main unit 1pc
Power supply 1pc
User manual 1pc

ABS-15-1C1P GSM/PCS dual signal Repeater/Amplifier/Booster

Tuesday, July 31st, 2012

Product Description

The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

Features

l  High gain, easy installation and operation.

l  Full-duplex, single-port design, build-in power supply.

l  Use ALC technology, adjust extent automatically

l  LED Light Working & Signal Condition Indicators

l  Big linear power, control intermodulation & saturation stably

l  Dependability stand by GB6993-86 standard

l  Compatibility of electromagnetism according with ETS300 609-4

l  CE and RoHs Approved

Technique

 

Frequency range

824-849/1850-910
869-894/1930-990

Gain ( dB)

Uplink Gp≥55 Downlink Gp≥60

Export power (Po)

≥15dBm

Pass band ripple

≤3dB

I/O impedance

50Ω/N connector

Noise figure

≤4dB

Transmission Delay

≤0.5μs

Ambient temperature

-1060

Power supply

AC110240V 4555Hz

Size

204×120×37mm

Reliability

To the GB6993-86 standard

Electromagnetic compatibility

To the ETS300 694-4 standard

Function

a) Power supply LED denote
b) Export power LED denote

coverage area

800 m2

Installation Approaches

  1. Fix up outdoor antenna reception on housetop and point to signal tower.
  2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
  3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
  4. Plug power adaptor into AC power socket and finish installation.

Technique Supporting

  1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
  2. If cannot call out, please adjust the direction of outdoor antenna.
  3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

Accessories
Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

Packing list
Main unit 1pc
Power supply 1pc
User manual 1pc

SpecificationsInstallation Sketch Map

ABS-27-1C CDMA signal Repeater/Amplifier/Booster

Tuesday, July 31st, 2012

Product Description

The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor magnetism environments, protract cellular battery life and reduce radiation of cellphones.

Features

l  High gain, easy installation and operation.

l  Full-duplex, single-port design, build-in power supply.

l  Use ALC technology, adjust extent automatically

l  LED Light Working & Signal Condition Indicators

l  Big linear power, control intermodulation & saturation stably

l  Dependability stand by GB6993-86 standard

l  Compatibility of electromagnetism according with ETS300 609-4

l  CE and RoHs Approved

Technique

 

Frequency range CDMA800(GSM850)

824849MHz
869
894MHz  

Gain ( dB)

Uplink Gp≥55 Downlink Gp≥60

Export power (Po)

≥27dBm

Pass band ripple

≤3dB

I/O impedance

50Ω/N connector

Noise figure

≤4dB

Transmission Delay

≤0.5μs

Ambient temperature

-1060

Power supply

AC110240V 4555Hz

Size

204×120×37mm

Reliability

To the GB6993-86 standard

Electromagnetic compatibility

To the ETS300 694-4 standard

Function

a) Power supply LED denote
b) Export power LED denote

coverage area

3000 m2

Installation Approaches

  1. Fix up outdoor antenna reception on housetop and point to signal tower.
  2. Connect outdoor antenna to “outdoor” port in repeater machine through cable.
  3. Connect indoor antenna(s) to “indoor” port in repeater machine through cable also.
  4. Plug power adaptor into AC power socket and finish installation.

Technique Supporting

  1. If still no signal receipt after activated repeater, please check if outdoor antenna point to signal tower or elsewhere have strong signal and check if strength achieve -70DBM.
  2. If cannot call out, please adjust the direction of outdoor antenna.
  3. If strength is not steady, please check if outdoor & indoor antennas are too close. Please ensure the outdoor and indoor antennas have distance of 20

Accessories
Selection Outdoor antenna use 7 unit yagi type antenna, indoor antenna use board or rooftop antenna and signal wire use coaxial-cable.

Packing list
Main unit 1pc
Power supply 1pc
User manual 1pc

Cell Phone Signal Booster for GSM 900MHz

Tuesday, July 31st, 2012

Product Description

Features

  • High-gain linear power amplifier   
  • ALC technology  
  • Ultra-low noise receive amplifier   
  • There is no interference to the base station, after the opening the original system and the base station without the need to adjust parameters  
  • Stable and reliable electromagnetic compatibility design 
  • The base station does not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications   
  • With full-duplex communication mode   

Technical Specifications

  • Working system: GSM
  • Frequency range:
    -uplink: 890-915MHz
    -Downlink: 935~960MHz
  • Output up:
    -Up link :18dBm
    -Downlink: 20dBm
  • Port VSWR:≤1.8DB
  • Noise figure:≤6dB
  • Ambient temperature:-15��~55��
  • Gain:
    -Up link: Gp≥40dB
    -Downlink: Gp≥45dB
  • Function:
    -Power supply LED denote
    -Export power LED denote
  • I/O impedence: 50Ω/N connector
  • Transmission delay:≤0.5μs
  • Power supply: AC110-240V
  • Coverage area: 100Sqm
  • Size: 170mm×105mm×30mm

Accessories

  • AC adaptor
  • Indoor Antenna
  • Outdoor Antenna
  • Coaxial cable1 (5m)
  • Coaxial cable2 (10m)
  • User manual

Note:Please be clear about which frequency you want to boost. You must check your local Mobile Frequency range and choose the booster as per your required Frequency. Please check your country's Mobile Frequency here.

Cell Phone Signal Booster (Dual Band GSM 900MHz/1800MHz)-EU

Tuesday, July 31st, 2012

Product Description

Features

Low or no mobile signal inside your room, forcing you to make calls while leaning out a window? Stuck in a 2 year contract but can't use your phone at home or work? Miss loads of calls because you have to leave your phone in one place to get signal? Well no longer with the worldwide use Cell Phone Signal Booster (Dual Band GSM 900MHz/1800MHz).

How does it work? Long story short, this Cell Phone Signal Booster introduces a revolutionary, patent-pending technology that captures low-signals from outside, brings it inside, enhances/boosts it, then extends that signal back out to create a large, high-signal cell phone zone. To prove it works perfectly, our product tester locked himself inside a metal shipping container coated on the inside with alluminium foil. His cell phone was left with 0 bars, but what happened when we turned on the Cell Phone Signal Booster? You got it – full bars and a perfect signal.

Who is it useful for? This Cell Phone Signal Booster is usually used in an area of the country where cell phone signals are normally weak, or locations where signals may be hard to reach, like basements, car parks, and tunnels. Due to its coverage area of up to 800 square meters, this Cell Phone Signal Booster has also found tremendous popularity in large areas owned by private businesses, such as supermarkets, cinemas, hotels, airports, etc.

When you are in a normally low-signal zone, buying a new cell phone won't do anything. What you need is this Cell Phone Signal Booster (Dual Band 900MHz/1800MHz) for maximum bars and excellent reception. It even includes everything you need to get it up and running and is suitable for mobile networks worldwide (dual band 900/1800MHZ). Order now and we'll ship it out to you tomorrow. Brought to you by Alljammer., the leader in consumer electronics.

At a Glance…

  • Instantly boost your cell phone signals!
  • Dual band GSM (900MHz/1800MHz) for worldwide use
  • Up to 800 square meter working range
  • Comes ready to go – no need for anything extra!
  • Powerful solution at an affordable price

Technical Specifications

  • Frequency range:
    -Up link GSM 890-915/DCS1710-1785(MHz)
    -Downlink GSM 935-960/DCS1805-1880(MHz)
  • Coverage: 500-800m2 (Distance will reduced when obstacles are in the way i.e. surrounding walls)
  • Gain(dB):
    -GSM/DCS Up link 65/55
    -GSM/DCS Downlink 70/60
    -Gain adjustable range MGC≥30dB
  • Guard band rejection
    -GSM (BW-60dB)<=42 MHz (BW-70dB)<=45 MHz
    -DCS (BW-60dB)<=104MHz (BW-70dB)<=107MHz
  • Power supply: AC110~220V 45~55Hz
  • Dimensions: Signal Booster: 160 x 121 x 22 mm (L x W x D)

Product Notes

  • Long range cell phone signal booster! Up to 800 square meters!
  • This device is for GSM 900 and 1800 MHz signals only. Please check frequency your country uses before purchasing

 

Note:Please be clear about which frequency you want to boost. You must check your local Mobile Frequency range and choose the booster as per your required Frequency. Please check your country's Mobile Frequency here

Cell Phone Signal Booster for 3G

Tuesday, July 31st, 2012

Product Description

This Cell Phone Signal Booster for 3G is specially designed for solving the problem of weak signals or no signals moment when you carry a 3G phone beside you. It can be used in following small regions signal blind or weak signal area, such as underground or semi-underground place of business, basements, underground parking, etc. Also this booster is popular with small-scale hot-spot signal Complaints areas, such as conference rooms ,a small supermarket, small shopping malls ,the office and small public areas ,etc. Traffic and large social influence areas ,such as bars ,cafes ,dance halls ,cafes ,fitness clubs and leisure etc. Some other occasions you can also see it. Elevator, lift wells in particular, home, office, luxury yachts, private cars, public security system and road safety management, etc.

Such powerful device for changing your life to a more convenient one, so what are you waiting for? Just directly click it into cart; you will see what the saying means.

 

Cell Phone Signal Booster for 3G Specification:

  • Working System: WCDMA-3G
  • Frequency range��

-Uplink 1920-1980MHz

-Downlink 2110-2170MHz

  • Gain��Up link: Gp≥68dB, Downlink: Gp≥70dB
  • Output up: Up link ��23dBm, Down link ��25dBm
  • Function:

-Power supply LED denote

-Export power LED denote

  • Port VSWR:≤1.8DB
  • I/O impedence: 50Ω/N connector
  • ALC:≥10dB
  • In-Band ripple:≤6dB
  • Noise figure:≤6dB
  • Transmission delay:≤0.5μs
  • Net Weight: 1.07KG
  • Power supply: AC/110-220V±10%   45��55Hz
  • Size: 198*148*39mm
  • Coverage area: 60Sqm

Accessories:

  • Cell Phone Signal Booster
  • Indoor Antenna
  • Outdoor Antenna
  • Power Adapter
  • Coaxial Cable 5M
  • Coaxial Cable 10M
  • Indoor Antenna Accessories and Screws
  • User Manual

Note:Please be clear about which frequency you want to boost. You must check your local Mobile Frequency range and choose the booster as per your required Frequency. Please check your country's Mobile Frequency here